Shipping/Pickup Information:
This item can be shipped via Parcel Carrier. For larger quantities we may ship via UPS GFP or LTL
We also offer dock/door pickup for most items at checkout.
60 Count ATE TYPE 200 Brake Fluid Liter Bottles
Specifications:
60 Count Multipack
ATE® TYPE 200 Brake Fluid Liter Bottles
This ATE TYPE 200 Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. Exceeds all DOT 4 requirements. This fluid is NOT SILICONE and is compatible with conventional brake fluid. ATE Fluids are compatible and will mix with most DOT3, DOT4, or DOT 5.1 Fluids. This top-of-the-line product meets the DOT 5.1 standard and surpasses this standard in nearly all the other requirements as well. This means that cars can go without a brake fluid change for up to 3 years while products with a lower wet boiling point have to be replaced considerably more often (e.g. DOT 3 products should be replaced annually). The overall high dry and wet boiling points make these fluids an excellent choice for street driven vehicles where brake fluid is flushed less frequently than in racing cars. Dry boiling point 536°F temperature. Wet boiling point 396°F temperature.
- Minimal decrease of boiling point due to excellent water locking properties
- Non-foaming when filling and bleeding the brake system
- Excellent corrosion protection due to selected additives
- High safety tolerance against steam bubbles
- Makes brake fluid changing intervals of up to 3 years possible
Out of Stock and On Order. Try subscribed delivery and have your order shipped on your schedule.
Pickup not available for this variation.
Shipping: (Contact us or submit RFQ)
Delivery: TBD
Pickup: TBD
60 Count Multipack
ATE® TYPE 200 Brake Fluid Liter Bottles
This ATE TYPE 200 Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. Exceeds all DOT 4 requirements. This fluid is NOT SILICONE and is compatible with conventional brake fluid. ATE Fluids are compatible and will mix with most DOT3, DOT4, or DOT 5.1 Fluids. This top-of-the-line product meets the DOT 5.1 standard and surpasses this standard in nearly all the other requirements as well. This means that cars can go without a brake fluid change for up to 3 years while products with a lower wet boiling point have to be replaced considerably more often (e.g. DOT 3 products should be replaced annually). The overall high dry and wet boiling points make these fluids an excellent choice for street driven vehicles where brake fluid is flushed less frequently than in racing cars. Dry boiling point 536°F temperature. Wet boiling point 396°F temperature.
- Minimal decrease of boiling point due to excellent water locking properties
- Non-foaming when filling and bleeding the brake system
- Excellent corrosion protection due to selected additives
- High safety tolerance against steam bubbles
- Makes brake fluid changing intervals of up to 3 years possible
